Grundfos 50 F Series User Manual

Declaration of conformity
484
Type Key:
DN32-120 F (N), DN40-80 to 180 F (N), DN50-(X)XX F (N),
DN65-(X)XX F (N), DN80-(X)XX F (N), DN100-(X)XX F (N) and DNXX-(X)XX D (F) (N).
– Machinery Directive (2006/42/EC)
Standard used: EN 809:1998 + A1:2009.
– Radio Equipment Directive (2014/53/EU)
Standards used: EN 60335-1:2012/AC:2014 + A11:2014, EN 60335-2-51:2003 + A1:2008 +
A2:2012, EN 62233:2008.
EN 55014-1:2006 + A1:2009 + A2:2011, EN 55014-1:2017, EN 61000-6-2:2005, EN 61000-3-
2:2014, EN 61000-3-3:2013, ETSI EN 301 489-1 V2.2.0, ETSI EN 301 489-17 V3.2.0.
ETSI EN 300 328 V2.1.1
– Ecodesign Directive (2009/125/EC)
Circulators:
– Commission Regulation (EC) No: 641/2009 and Commission Regulation (EU) 622/2012.
Applies only to circulators marked with the energy efficiency index EEI. See the pump nameplate.
Standards used: EN 16297-1:2012, EN 16297-2:2012.
– RoHS Directives (2011/65/EU and 2015/863/EU).
Standards used: EN IEC 63000:2018.
Type Key:
DN25-(X)XX (N), DN32-40 to 100 F (N), DN32-120 (N), DN40-40 to 60 F (N).
– Machinery Directive (2006/42/EC)
Standard used: EN 809:1998 + A1:2009.
– Low Voltage Directive (2014/35/EU).
Standards used: EN 60335-1:2012/AC:2014 + A11:2014, EN 60335-2-51:2003 + A1:2008 +
A2:2012, EN 62233:2008.
– EMC Directive (2014/30/EU).
Standards used: EN 55014-1:2006 + A1:2009 + A2:2011, EN 55014-1:2017, EN 61000-6-2:2005,
EN 61000-3-3:2013, EN61000-3-2:2014
– Ecodesign Directive (2009/125/EC).
Circulators:
Commission Regulation (EC) No: 641/2009 and Commission Regulation (EU) 622/2012. Applies
only to circulators marked with the energy efficiency index EEI. See the pump nameplate.
Standards used: EN 16297-1:2012, EN 16297-2:2012.
– RoHS Directives (2011/65/EU and 2015/863/EU).
Standards used: EN IEC 63000:2018.
This EC declaration of conformity is only valid when published as part of Grundfos service kit
instruction (publication number 99363375) or the Grundfos Safety instructions and other important
information (publication number 99210935).
Bjerringbro, 17th August 2020
Frank Skovgaard
Senior Manager
Grundfos Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro, Denmark
Manufacturer, Person authorised to compile technical file and empowered
to sign the EC/EU declaration of conformity.

Grundfos 50 F Series Specifications

General

Protection class	IP55
Insulation class	F
Type	Centrifugal pump
Pump housing	Cast iron
Impeller	stainless steel
Frequency	50 Hz / 60 Hz
Connection type	Flange
Speed	2900 rpm
Liquid temperature	-10°C to +120°C
Voltage	230V or 400V