Grundfos CIM 500

A.1.10. GiC configuration
By default, the GiC provisioning server URL and DHCP are activated.
TM077956
System information
Object Description
IP Address
Configuration of the static IP address if a DHCP server is not used. EtherNet/IP is not
allowed to share the IP address with the CIM 500 webserver
.
Subnet Mask Configuration of the subnet mask if a DHCP server is not used.
Gateway Configuration of the gateway address if a DHCP server is not used.
Use DHCP
The CIM 500 module can be configured to automatically obtain its EtherNet/IP network
settings from a DHCP server, if available on the network. Default: No use of DHCP.
MAC Address MAC address of the interface.
DNS Server
The module can be configured to use a specific domain name server, if available on the
network.
292
Appendix A