A.1.9. GRM IP configuration
By default, the GRM server URL and DHCP are activated on the GRM webserver
.
You need a contract with Grundfos and an external router with Internet connection to gain access to
the GRM server
.
TM074521
Real Time Ethernet Protocol Configuration - GRM IP
Object Description
GRMIP Port
Number
A change is only needed in case Grundfos requires it.
URL
The default URL link to the GRM Server is active but hidden.
A change is only needed in case Grundfos requires it.
Check to Update
the Settings
This setting enables editing of the URL.
Checked: Editing of the URL is possible (not recommended).
Unchecked: No editing of the URL is possible (default).
Default setting of
GRM server
address
Set the URL link to GRM server to default value.
Only needed if a manual URL was typed in and should be changed back.
291
Appendix A
To Next Page
Loading...
