English (GB)
15
11. Service
Fig. 21 Service
This tab provides a tool to manage service of pump
installations. The basic functionality keeps track of
the total number of operating hours for each of the
pumps monitored by the system. For some products,
the number of starts is also monitored.
You can set thresholds for each service parameter
and be notified automatically via e-mail when a
threshold is met. It is also possible to set a date on
which you want to be notified if your service strategy
is based on a time interval.
When a new pump is detected by the CIM interface,
an entry for that pump is automatically created under
the service tab.
If you enter the product number of the monitored
Grundfos pump, you will have direct online access to
documentation, including service videos, pump
curves, etc.
Fig. 22 Example of a service log entry
TM04 7302 2410TM04 7303 2410