Need help?Do you have a question about the Grundfos FireSAFE Series and is the answer not in the manual?
General| Impeller Material | Bronze, Stainless Steel |
|---|---|
| Sealing | Mechanical Seal |
| Connection Type | Flanged |
| Application | Fire suppression systems in commercial and industrial buildings |
| Standard | NFPA 20 |
| Driver | Electric Motor |
| Flow Rate | Varies by model |
| Head | Varies by model |
| Operating Pressure | Varies by model |
| Pump Casing Material | Cast Iron |
| Material | Cast iron, stainless steel, bronze |
| Motor Type | Diesel Engine |
| Power Range | Varies by model |
| Pressure Rating | Varies by model |
| Temperature Range | Varies by model |
Lists controller features like modes, digital signals, and monitoring functions.
Details the three operating modes: Pressure Maintenance, Fire, and Service.
Explains automatic weekly and manual pump health tests.
Overview of safety precautions for electrical and mechanical connections.
Step-by-step guide for priming and venting the pump and system.
Checklist for verifying all installation steps are completed before commissioning.
Checklist for verifying correct operation after installation and before handover.
Checklist to verify the entire system's performance before final sign-off.
States no user serviceable parts and outlines annual testing requirements.
Detailed checklist for performing annual service and testing.
Lists common fault events, detected causes, and recommended remedies.
Diagnoses common operational problems with causes and corrective actions.
To Next Page