Grundfos MP 1 / Redi-Flo2 - Cable and Rotation Checks; Cable End Connection to Motor; Checking Pump Rotation Direction

19
3.1 Cable end to motor
Fitplugpinsontheblack,blueandbrownleads.Seeg.7.
Presshometheplugpinandxitrmlybymeansofthecrimpingtool,part
no.SV0374.Seeg.8.
Fit the cable in the motor. See 2. Replacement of motor cable.
3.2 Checking of direction of rotation
Observe the movement of the pump shaft when the electricity supply is
switched on for a short period. The correct direction of rotation is indicated
by an arrow on the side of the motor.
Fitthettingsandthehosetothepump.Thepumpisnowreassembledand
can be tested.
Fig. 7 Fit plug pins
Fig. 8 Fixing the plug pin
Fig. 9 Checking direction of
rotation
Disclaimer
Nothingfromthisdocumentmaybecopiedand/ormadepublicbymeansofprinting,photocopy,microlmorinanyotherwaywithout
thepriorwrittenapprovalofthepublisher.Technicaldatacanchangewithoutpriornotication.EijkelkampSoil&Waterisnotresponsible
and/or liable for any damage and/or personal injury due to (incorrect) use of this product. Eijkelkamp Soil & Water would be pleased to
receive your reactions and comments about this product and the user instructions.