12
TM03 3909 1206
TM03 3910 1206
5. Press down the threaded pipe to ensure that the shaft is in
bottom position.
6. Remove the threaded pipe.
TM03 3911 1206
TM03 3912 1206
7. Apply Loctite 243 to the threads of the hexagon socket
screws. Tighten the screws to the correct torque.
See below.
8. Fit the coupling guard. Tighten the screws to the correct
torque. See below.
M5: 6 ± 2 Nm M5 x 10 mm: 6 ± 2 Nm
M6: 8 ± 2 Nm
M8: 15 ± 3 Nm
To Next Page
Loading...
