English (GB)
3
3. Delivery and handling
3.1 Delivery
The pumps are tested 100 % before leaving the
factory. The test includes a function test where the
pump performance is measured to ensure that the
pump meets the requirements of relevant standards.
Test certificates are available from Grundfos.
3.2 Handling
Weight: See label on the packing.
Pumps should be lifted by means of nylon straps and
shackles or a hook as shown on figs. 1 to 3.
Fig. 1 Correct lifting of pump without base
frame
Fig. 2 Correct lifting of pump with base frame
Fig. 3 Correct lifting of pump without motor
Fig. 4 Incorrect lifting of pump
Warning
Pump motors as from 4 kW are supplied
with lifting eyes which must not be used for
lifting the entire pump unit. See fig. 4.
TM03 3973 1306
TM04 5179 2809TM05 3309 1112TM03 3972 1306
To Next Page
Loading...
