Grundfos R100 - Switching on the R100; Switching off the R100; Setting the R100

10
1.1 Switching on the R100
Press to switch on the R100.
Press and the entry display will appear.
Light and contrast in display
In all displays, the light can be switched on or off by simultaneously pressing
and any of the arrow buttons.
If the buttons are not pressed for 2 minutes, the light in the R100 is automat-
ically switched off.
The display contrast can be adjusted by simultaneously pressing and
or .
1.2 Switching off the R100
Press and simultaneously to switch off the R100.
If the buttons are not pressed for 5 minutes, the R100 is automatically
switched off.
2. Setting the R100
Settings to be made:
• Language
• Real-time setting
• Name and address.
Communication
Contrast
Setting
Light