Grundfos R100 - Language Setting; Real-time Setting; Name and Address Entry

11
2.1 Language
The R100 has been factory-preset to show texts and data in English.
The user can select any of the supported languages.
If US English is selected, the units of the displayed data will change as
follows:
2.2 Real-time setting
In this display, the real time can be entered.
This entry is only of importance for the function Store status data where
the information will appear in the generated file.
2.3 Name and address
In this display, the name and address can be entered.
This entry is only of importance for the function Store status data where
the information will appear in the generated file.
Measurement
Unit
SI US
Flow [m
3
/h] [US gpm]
Head [m] [ft]
Temperature [°C] [°F]
Specific energy consumption [Wh/m
3
] [Wh/kgal]