Declaration of conformity
UK declaration of conformity
We, Grundfos, declare under our sole responsibility
that the products to which the declaration below
relates, are in conformity with UK regulations,
standards and specifications to which conformity is
declared, as listed below:
Valid for Grundfos products:
SE/SL 25-63 kW
• Supply of Machinery (Safety) Regulations 2008
Standards used: EN 809:1998+A1:2009
• Electromagnetic Compatibility Regulations 2016
Standards used: EN 61326-1:2013
• The Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment
Regulations 2019
Standard used: EN IEC 63000:2018
• Equipment and Protective Systems Intended for
Use in Potentially Explosive Atmospheres
Regulations 2016
Applies only to products with Ex II 2G marking on
nameplate. Further information, see below.
Certificate
No:
FM23ATEXxxxxX
Standards
used:
EN IEC 60079-0: 2018, EN
60079-1:2014, EN
60529:1991+A1:2000+A2:2013, EN
ISO 80079-36:2016, EN ISO
80079-37:2016
Approved body for UK – Type Certificate: FM
Approvals Ltd., No. 1725, United Kingdom
Approved body for production: DEKRA Certification
UK Ltd., No 8505, Stokenchurch House, Oxford
Road, Stokenchurch, HP14 3SX, United Kingdom
Manufacturer: Grundfos Holding A/S, Poul Due
Jensens Vej 7, DK-8850 Bjerringbro, Denmark
This UK declaration of conformity is only valid when
accompanying Grundfos instructions (publication
number 92777905).
UK Importer: Grundfos Pumps ltd. Grovebury Road,
Leighton Buzzard, LU7 4TL.
Székesfehérvár, 12th September, 2023
Zoltán Lajtos
MUNI Solutions Value Stream Director
Grundfos Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro, Denmark
Manufacturer and person empowered to sign the UK
declaration of conformity.
10000458452
32
Declaration of conformity
To Next Page
Loading...
