Need help?Do you have a question about the Grundfos SLV Series and is the answer not in the manual?
General| Protection class | IP68 |
|---|---|
| Temperature Range | 0 °C to +40 °C |
| Type | Submersible |
| Application | sewage, drainage |
| Impeller Type | Vortex |
| Voltage | 230V, 400V |
| Frequency | 50 Hz |
| Material | Stainless steel, cast iron |
Understand safety warnings to prevent personal injury.
Explanation of explosion protection classifications for Ex-approved pumps.
Safety precautions for using pumps in potentially explosive environments.
Special conditions and warnings for safe use of explosion-proof pumps.
Step-by-step guide for installing pumps on an auto-coupling system.
Guide for installing pumps freely on a ring stand in a tank.
Information on LC, LCD pump controllers and IO 111/113 interfaces.
Details on thermal switches, PTC thermistors, and WIO sensors.
Step-by-step guide for initial pump start-up after installation or service.
Steps for dismantling the pump, including oil change and component removal.
Procedures for reassembling the pump after service or repair.
Table listing common faults, their causes, and remedies.
To Next Page
