EasyManuals Logo

Grundfos Sololift2 C-3 User Manual

Grundfos Sololift2 C-3
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
6.6 Rattling noise from the lifting station,
but water is evacuated
Cause Remedy
A foreign body is
hitting the impeller.
Remove the foreign
body.
6.7 Odour from the tank
Cause Remedy
The carbon filter is
contaminated.
Replace the carbon
filter.
6.8 Water from shower or another appliance
connected to the lower inlets drains off
slowly, and there is backflow from the
lifting station
Cause Remedy
The hydraulics are
blocked.
Check that the motor
shaft can rotate freely.
Remove the motor
flange to clean the
impeller.
The start level has
changed.
Check and clean the
float switch pipe.
The inlet pipe
diameter is too small.
Use a pipe with a
larger diameter.
10
English (GB)

Other manuals for Grundfos Sololift2 C-3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grundfos Sololift2 C-3 and is the answer not in the manual?

Grundfos Sololift2 C-3 Specifications

General IconGeneral
Product NameGrundfos Sololift2 C-3
CategoryWater Pump
Max Head8.5 m
Voltage220-240 V
Frequency50 Hz
Inlet SizeDN40
Protection ClassIP44
Outlet SizeDN 32
Temperature Range5 - 50 °C
Liquid Temperature0°C to 90°C
ApprovalsVDE

Related product manuals