Grundfos SQ Instructions

• Machinery Directive (2006/42/EC).
Standards used:
EN 809 + A1:2009.
•
Low Voltage Directive (2014/35/EU).
Standard used:
EN 60335-1:2012 + A11:2014.
EN 60335-2-41:2003 + A1:2004 + A2:2010
• EMC Directive (2014/30/EU).
Standard used:
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 55014-1:2006 + A1:2009 + A2:2011
EN 55014-2:1997 + A1:2001 + A2:2008
This EU declaration of conformity is only valid when
published as part of the Grundfos safety instructions
(publication number 99258492).
Bjerringbro, 14/03/2017
Carsten Høybye Pedersen
Senior Manager
Grundfos Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro, Denmark
Person authorised to compile technical file and
empowered to sign the EU declaration of conformity.
126
Declaration of conformity

Grundfos SQ Specifications

General

Motor	Permanent magnet motor
Material	Stainless steel
Protection class	IP68
Frequency	50/60 Hz
Application	Irrigation, Pressure boosting
Pumped liquid	Water
Power Supply	Single-phase or Three-phase
Operating Temperature	0 - 40 °C