UPMO
This pump is for internal control with control mode CC or
for external PWM signal control with profile A.
The pump automatically enables the PWM input-signal
control mode by SignalDetect when the signal cable is
plugged in.
Control mode
LED1
green
LED2
green
LED3
yellow
LED4
yellow
LED5
yellow
CC1 ●
CC2 ● ●
CC3 ● ● ●
PWM A
●
1
● ● ●
1
12 flashes per second.
If the pump does not detect a PWM signal or if the signal
equals 0, the pump returns to its previous control mode.
UPM3
8
28
Control modes, operating panel and settings