Grundig 32 GFB 6827 User Manual

ENGLISH
90
SETTING FURTHER CHANNELS
-----------------------------------------------------
Searching for digital channels
from the cable provider manu-
ally
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
V «, » Λ «,
»
<
« or »
>
« and press »OK« to confirm.
3 Select the menu item »Source« with »
>
« or
»
<
« and press » V « to confirm.
– »Source« menu is active.
4 Select the line »Manual Channel Search«
with »
V « or » Λ « and press »OK« to
confirm.
5 Select the option »Cable (DVB-C)« with
»
V « or » Λ « and press »OK« to confirm.
6 Select whether to search for digital or ana-
logue TV channels.
To to this press »
V « or » Λ « to select the
option »Digital« or »Analogue« and confirm
with »OK«.
7 With »
V « select »Frequency (MHz)«
and enter frequency (4-digit) directly with
»1...0«; search will start.
– The search is finished when the channels
found appear in the list.
8 Press »EXIT« to end the setting.
Searching for digital terrestrial
TV channels automatically
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
V «, » Λ «,
»
<
« or »
>
« and press »OK« to confirm.
3 Select the menu item »Source« with »
>
« or
»
<
« and press » V « to confirm.
– »Source« menu is active.
4 Select the line »Advanced« with »
V « or
»
Λ « and press »OK« to confirm.
5 Select the line »Active Antenna Power« with
»
V « or » Λ «.
Switch on the antenna power supply for the
antenna with »
<
« or »
>
« (»On«).
Important:
7
The antenna power supply (5V ) may only
be switched on if the antenna is an active
indoor antenna with a signal amplifier and
it is not already supplied with a voltage via
a mains plug (or similar supply). Otherwise
you may cause a short circuit and irrepara-
bly damage your antenna.
6 Press »BACK
<
« to go back one menu
level.
7 Select the line »Automatic Channel Search«
with »
Λ « or » V « and press »OK« to
confirm.
8 Select the option »Air (DVB-T/T2)« with
»
Λ « or » V « and press »OK« to confirm.
9 Select whether to search for digital or ana-
logue TV channels.
To to this press »
Λ « oder » V « to select the
option »Digital« or »Analogue« and confirm
with »OK«.
10 Press »

« (red) to start searching.
Notes:
7
When updating via the same satellites a
security query is displayed at the start of a
search.
7
If the previously stored channels should
be retained in the channel list and the new
channels found be added to it, then press
»

« (green).

Grundig 32 GFB 6827 Specifications

General

Brand	Grundig
Model	32 GFB 6827
Category	TV
Language	English