Grundig CMS 1050 DAB+ - Page 31

31
ENGLISH
EXTERNAL DATA MEDIA MODE
-------------------------------------------------------
Repeat functions
Repeating a track (Repeat One)
1 Press »REP« once during playback on the re-
mote control.
– Display: »REP ONE«
– Display: »REP« flashes, the current track is
repeated.
2 To stop the function, press »REP« so repeat-
edly until the display »OFF« disappears.
Repeating all the tracks of a folder
(Repeat Folder) (MP3/WMA only)
1 Press »REP« twice during playback.
– Display: »REP FOLD«
– Display: »REP« flashes, all the tracks in the
current folder are played back repeatedly.
2 To stop the function, press »REP« repeatedly
until the display »OFF« disappears.
Repeating all tracks on the data
medium (Repeat All)
1 Press »REP« three times during playback.
– Display: »REP ALL«.
– Display: »REP« and »ALL« flashes, all the
tracks in the current folder are played back
repeatedly.
2 To stop the function, press »REP« repeatedly
until the display »OFF« disappears.
Playing back tracks in random
order (Random)
1 Press »REP« four times during playback.
– Display: »SHUFFle«.
– Display: »SHUF« flashes, all tracks on the data
medium are played back once in random or-
der.
2 Press »REP« to switch off the random function.
– The display »OFF«.disappears.
Playing the start of each track
(intro)
1 Press »INTRO« during playback.
– Intro playback starts automatically.
– The first ten seconds of all the tracks or all
the remaining tracks on the data medium are
played.
2 To quit this function, press »INTRO« again.
Creating a playlist
You can create a track memory of up to
20 tracks for the current data medium in any
order you choose and then play them back in
that sequence. A track may be saved more than
once.
The entries can only be made in stop mode.
Selecting and storing tracks
1 Press »
7
« on the remote control to end play-
back.
2 Press »MEMORY PROG« to open the func-
tion.
– Display: »00 1 PR« lights up, »01« flashes.
3 Select the folder by pressing »FOLD – +«, then
select the track with »
3
« or »4 «
and save it with »MEMORY PROG«.
– Display: »00 2 PR« lights up, »02« flashes.
4 To store more tracks, repeat step 3.
Playing back a playlist
1 Start playlist playback with »eII«.
– Playback begins with the first programmed
track.
2 Press »
7
« once to stop playback.
3 To play the playlist again, press »MEMORY
PROG« in the stop position, followed by
»eII«.
Deleting the playlist
1 To delete the playlist, press »
7
« twice in the
stop position;
or
open the CD compartment;
or
select a different input source.