Grundig CMS 1050 DAB+ - Inserting;Connecting Music Data Media

ENGLISH
30
EXTERNAL DATA MEDIA MODE
-------------------------------------------------------
Inserting/connecting music data
media
Inserting the disc
1 Press ».« to open the CD compartment.
– The CD compartment opens.
2 Put in the disc with its label facing upwards.
3 Press ».« to close the CD compartment.
– The disc is read.
– Display in MP3/WMA mode: the total num-
ber of albums and tracks.
– Display in CD-DA mode: the total number of
tracks and the total playing time.
4 Playback starts automatically.
Connecting an MP3 player or a USB
memory stick
1 Switch the device to standby mode by press-
ing »8«.
2 Connect the USB interface of the MP3 player
to the » « socket of the hi-fi system with a
standard USB cable;
or
insert the USB plug of the USB memory stick
into the USB interface » « of the hi-fi sys-
tem.
3 Switch on the device from standby by press-
ing »8«.
– Display: the total number of albums and
tracks.
Playback
Pausing and resuming playback
1 Press »eII« to pause playback.
– Display: the playing time flashes.
2 Resume playback with »eII«.
– Display: number of folders and tracks or
track information and the elapsed playing
time.
Resuming playback
1 Pause playback by selecting another input
source or press »8«.
– If you select the data medium again, play-
back continues from the point at which it
stopped.
Stopping playback
1 To stop playback, press »
7
«.
– When playback starts again, it begins from
the first track.
Repeating the current track
1 Press »
3
« briefly during playback.
Selecting another track or folder
When you play music CDs, you can select the
track; when you play MP3/WMA files, you can
also select folders.
1 Press »
3
« or »4 « repeatedly
during playback until the number of the track
you want appears in the display;
or
select the folder by pressing »FOLD – +«, then
select the track with»
3
« or
»4 «.
– Playback of the selected track starts auto-
matically.
Searching for a passage within a
track
1 During playback, press »
3
« or
»4 « and hold down until the passage
has been found.
2 Playback begins if you release »
3
« or
»4 «.
Displaying track information
(for MP3/WMA)
If information about the artist, album and track
are available on the data medium, this is dis-
played (ID3 tag).
1 Press »INFO« repeatedly to display informa-
tion.