41
ENGLISH
• Or press the BASS button on the unit then
rotate VOL+/- knob to adjust the bass level.
Adjust the Treble Level
• Press the TREBLE +/- button on the remote
control to adjust the treble level.
• Or press the TREBLE button on the unit then
rotate VOL+/- knob to adjust the treble level.
Select Equalizer (EQ) Effect
• Press the EQ button on the remote control or on
the unit repeatedly to select:
POP - CLASSIC - ROCK - JAZZ - FLAT.
Adjust the Brightness
• Press the DIMMER button on the remote
control to select brightness level. (low/mid/high)
Set the Sleep Timer
This unit can switch to standby automatically after
a set period of time.
1 Press the button on the remote control
repeatedly to select your desired number of
minutes. The number of minutes shown will
display in this sequence:
SLEEP120 SLEEP 90 SLEEP 60
SLEEPOFF SLEEP 15 SLEEP 30
2 Stop pressing the button when your desired
number of minutes is displayed. The sleep
timer is now set.
• Press the button to view the remaining time
before switch off.
• To cancel the sleep timer, press the button
repeatedly until “SLEEPOFF” shows on the
display.
MAIN OPERATION ____________________________
Factory Reset
Reset device to default setting.
1 In ON mode, press MENU button and then
press OK button to entering system menu
setup.
2 Press / buttons on the remote control
to select RESET and then press OK button to
entering reset setting.
3 Press / buttons to select Y and then
press OK button to reset the factory default
settings.
• The main unit back to Standby mode.
Play for External Audio Devices
1 Ensure that the unit is connected to the TV or
audio device.
2 Press the MODE button on the unit or on the
remote control to select the AUX or LINE IN
mode.
3 Operate your audio device directly for
playback features.
4 Press the VOL+/- buttons to adjust the
volume to your desired level.
To Next Page
Loading...
