Grundig Vision 7 - Convenience Functions; Convenience Functions with the Features Menu

26
CONVENIENCE FUNCTIONS
------------------------------
Convenience functions with the »Features« menu
1 To open the »MAIN MENU« press »i«.
2 Select »Features« with » Λ « or » V « and confirm with »G«.
Note:
Further operation is explained in the following sections.
Changing the menu language
1 Select »Menu language« with » Λ « or » V «
2 Select the language with »
–
« or »
+
«.
3 Press »i« to finish the setting.
Entering the time manually
1 Select »Timer« with » Λ « or » V « and press »G« to confirm.
2 Select »Current time« with » Λ « or » V «.
3 Enter the time using »1 ... 0«.
4 Press »i« to end the setting.
Switch-on timer/switch-off timer
A switch-on and switch-off time can be set in the »TIMER« menu. After
this time has elapsed, the television switches to standby mode or
switches on from standby mode. You can enter the channel the tele-
vision switches on to in the »Program no« line.
1 Select »Timer« with » Λ « or » V « and press »G« to confirm.
2 Select »Turn-off time« or »Turn-off time« by pressing » Λ « or » V «.
3 Enter the switch-on time, switch-off time or channel number with
»
1…0«.
Note:
You can delete the switch-on or switch-off time with »G«.
4 Select »Channel list« with » Λ « or » V « and press »
–
« or »
+
« to
select »DIGITAL« or »ANALOG«. This entry is only possible if you
have first entered a switch-on time.
5 Select »Program no« with » Λ « or » V « and enter the channel with
»
1…0«.
6 Press »i« to end the setting.
FEATURES
Menu language English
Timer
Reset
Active antenna Off
IDTV Settings
Back Exit
TIMER
Current time 13:00
- - : - -Turn-off time
Turn-off time - - : - -
Channel list DIGITAL
Program no P001
G
0 -
G
9
Back Exit
TIMER
Current time 13:00
Turn-off time - - : - -
Turn-off time - - : - -
Channel list DIGITAL
Program no P001
G
0 -
G
9
Back Exit