ENGLISH
33
With an analog TV signal
Video signal: FBAS.
Audio signal: stereo, analogue.
Channel position »AV3«.
1 Connect the »Video« cinch socket on the television and the
corresponding socket on the external device using cinch cables
(video signal).
2 Connect the »L R« sockets on the television to the corresponding
sockets on the external device using cinch cables (audio signal).
Using a video recorder, DVD player or
set-top box
1 Switch on the video recorder, DVD player or set-top box and se-
lect the function you wish to use.
2 Press »AV«, select the input signal channel with »
Λ
« or
»
V
« (»AV1«, »AV2«, »AV2–Y/C«, »AV3«, »S-Video«, »HDMI1«,
»HDMI2« or »YPbPr«) and press »
G« to confirm.
Headphones
Connecting headphones
1 Plug the headphone jack (3.5 mm jack plug) into the head phone
socket on the left side of the television.
Selecting the sound settings for the headphones
1 Press »i« to open the »MAIN MENU«.
2 Select »SOUND« with »
Λ
« or »
V
« and confirm with »G«.
3 Select »Headphones« with »
Λ
« or »
V
«.
4 Press »
–
« or »
+
« to adjust the headphone volume.
5 Press »i« to finish the setting.
USING EXTERNAL DEVICES
----------------------------------
SOUND
Back
Exit
Volume
Balance
Sound type
Sound Mode
AVL
Stereo
Normal
Headphones
Aus
TruSurround XT
Aus
Equalizer
To Next Page
