ENGLISH
7
Connecting the antenna and the mains cable
1 Plug the cable of the rooftop or indoor antenna (passive or
active indoor antenna with its own power supply for digital tele-
vision stations) into the antenna socket »
TUNER« on the tele vision
set
or
Plug the rooftop antenna cable (for analogue television stations)
into the »
TUNER« socket on the television.
Note:
When connecting an indoor antenna you may have to try it out
at different positions until you get the best reception.
2 Plug the mains cable supplied into the »AC IN« mains socket of
the television.
3 Plug the mains cable into the wall socket.
Note:
Only plug the device into the mains socket after you have
connected the external devices and the antenna.
Only connect the television using the power cord supplied to a
suitable earthed safety socket.
Do not use an adapter plug or extension lead which does not
meet the applicable safety standards. Do not tamper with the
power cord.
CONNECTION/PREPARATION
----------------------
1 2
3
To Next Page
Loading...
