12
Burn-In and Warm-Up
Your Gryphon unit has been thoroughly tested and burned in before shipping. Performance
will continue to improve during the first 40 – 50 hours of normal use. After this period, optimum
performance will be reached approximately 45 minutes after turn-on.
Mains Switch
The main ON/OFF switch on the Essence Preamplifier is placed on the bottom right side of the unit,
near the front.
If the blue LED to the left of the ON/STD symbol flashes 3 times in STB mode, this indicates incorrect
/ defective AC mains voltage.
SAFETY INSTRUCTIONS
Hazardous live AC power! Please find important safety instructions on p. 24
INPUT:01
12
MAIN
ON/OFF
To Next Page
Loading...
