14
Remote Control
Besides the functions from the front panel, the remote control offers the following features:
MONITOR
MONITOR is used to listen to a tape recorder. If the recorder has a source/monitor function, this
switch may be used to listen to the tape as it is being recorded. When selected, the display shows
an M in the top right corner of the display.
MENU
This remote button selects the Essence Preamplifier MENU options, described later in this manual.
OK
The black button in the centre of the remote is the OK button and is used to confirm the choices
made in the menu. This is described later in this manual.
Direct input select (1-10)
The numbered buttons from 1 to 10 are used to directly select the desired input.
DAC - FILTER, DSD LP, 0/-6dB
These buttons give direct access to some DAC settings. See the chapter regarding the optional
DAC later in this manual.