14
Instruction GS 1010
GS Engineering B.V.
manufacturer hydraulic sweepers
ATTENTION: Do not use the choke when the engine is hot or
when the air temperature is high.
4. Take hold of the starter handle (see Illustration 3) and slowly
pull until you feel resistance. Firmly pull the cord to get through
the compression, avoid backfire and start the engine. Turn off
the choke when the engine is running.
Illustration 3
5. Put the accelerator handle on fast for normal use.
Follow the procedure below to start the Honda GCV 160:
1. Turn the fuel cock to ON. (see Illustration 1)
Illustration 1
FUEL COCK
Starter handle
To Next Page
Loading...