15
Instruction GS 1010
GS Engineering B.V.
manufacturer hydraulic sweepers
2. Push the adjusting handle towards the CHOKE position
indicated by the choke symbol ( ) on the adjusting
handle.
(see Illustration 2)
ATTENTION: Do not use the choke when the engine is hot or
when the air temperature is high.
Illustration 2
3. Slowly pull the starter handle until you feel resistance, then pull
firmly. (see Illustration 3)
ATTENTION: Do not allow the starter handle to beat back against
the engine. Carefully return the handle to avoid damage to the
starter.
Illustration 3
To Next Page
Loading...