Need help?Do you have a question about the GSi InterSystems TP and is the answer not in the manual?
General| Manufacturer | GSi InterSystems |
|---|---|
| Model | TP |
| Synthesis Type | Sampler |
| Outputs | Stereo Output, Headphone Output |
| MIDI | In, Out, Thru |
| Connectivity | MIDI, Audio In/Out |
Highlights safety labels, general precautions, and the importance of maintaining safety devices.
Emphasizes operating only on designated voltages to prevent fire, explosion, or serious injury.
Explains the function and operation of the Truck Probe system.
Lists additional features that can be included with the Truck Probe.
Details the standard construction materials and options for the Truck Probe.
Instructions for inspecting equipment upon arrival for damage and completeness.
Steps to take before starting installation, including studying documentation and planning.
Guidance on selecting an appropriate location for installing the Truck Probe.
Instructions for mounting the Truck Probe assembly onto its concrete foundation.
Procedures for starting up the Truck Probe system for the first time.
Guidelines for choosing a suitable location for the control enclosure.
Information and compliance requirements for electrical installation and wiring.
Provides specifications for hydraulic pump motors, including horsepower and electrical requirements.
Identifies and explains the functions of the control panel components.
Details push-button and joystick controls for probe movement.
Explains the main fuse for protection and the terminal strip for connections.
Details the hydraulic pump motor, starter, and overload protection.
Describes the oil heater and the function of vacuum motors during operation.
Explains the function of solenoid valves for boom movement and sample ports.
Provides step-by-step instructions for adjusting the counter balance valve.
Explains the relief valve's role in limiting hydraulic pressure and how to set it.
Describes valves that control boom swing speed.
Details cylinders for boom movement and the actuator for sample ports.
Describes the rotational motor for boom swing and the hydraulic pump's performance.
Outlines the principles of a good maintenance program for longevity.
Lists items to inspect at regularly scheduled intervals for proper function.
Instructions for monthly and semi-annual lubrication of boom components.
Daily checks for hydraulic oil level and temperature to ensure proper operation.
Procedures for cleaning breather caps and replacing hydraulic filters.
Steps for annually replacing hydraulic oil and filter, including safety precautions.
How to inspect the compartmentized probe tip for proper operation and condition.
Procedure to check and adjust vacuum pressure balance for the core probe.
A table listing common symptoms, possible causes, and corrective actions for general issues.
Troubleshooting steps for directional solenoid valves when they do not shift.
Identifies external and internal causes of cylinder leaks and how to address them.
Provides contact information and required details for ordering parts from InterSystems.
Lists available repair kits for economical rebuilding of defective parts.
A detailed list of parts for the Truck Probe, including item number, part number, and quantity.
Outlines the warranty period, coverage, exclusions, and limitations of liability.
To Next Page