3
I. GENERAL SAFETY INFORMATION
SAFETY FIRST! The symbols shown identify
examples of the safety labels and signs to be
found on InterSystems equipment. They are
affixed to the equipment to warn of danger to
persons and of possible equipment damage.
These signs must never be removed, tampered
with, painted over or obscured in any way.
(See Page 4 for label locations.) If labels are
damaged or become unreadable, replacement
labels are available from InterSystems. The
user must institute a continuing program to
instruct all personnel in safe operating and maintenance procedures, and to insure that all safety devices, guards,
and covers are intact and operable, and that all safety signs are legible.
Consult InterSystems before making any changes to the Truck Probe or its operating environment. Careless
changes could result in death or serious injury to people, and reduce the performance and service life of the
equipment.
Never perform any service on this equipment or any other powered equipment until all power has been shut off and
locked out so that it cannot be restored without the consent and knowledge of the person who interrupted power.
Power includes electrical, fluid, mechanical, or pneumatic energy.
Never perform any service on this equipment without utilizing the required PPE (personal protective equipment).
Refer to the MSDS(s), material safety data sheet(s), on all the products to which this equipment is in contact with to
determine what PPE is required.
DANGER
THIS EQUIPMENT IS TO BE OPERATED ONLY ON THE VOLTAGE DESIGNATED ON THE
CERTIFIED ELECTRICAL DRAWING(S)! FIRE OR EXPLOSION MAY RESULT, WHICH CAN
CAUSE DEATH, SERIOUS INJURY, AND EXTENSIVE DAMAGE TO EQUIPMENT. DO NOT
CONNECT TO VOLTAGES OTHER THAN DESIGNATED.
To Next Page
Loading...
General