Need help?Do you have a question about the GST GST200N and is the answer not in the manual?
Intelligent Fire Alarm Control Panel suitable for small buildings, offering simple installation and operation.
Loop Card designed for adding a second loop to the system.
Interface card providing USB connectivity for printer output.
RS232 interface card for establishing PC connections.
Network card utilizing CAN Class B protocol for system integration.
ModBus communication card for third-party system interfacing.
Network card utilizing CAN Class A protocol for system integration.
Network card enabling TCP/IP connectivity for system integration.
Dedicated printer accessory for the fire alarm control panel.
Modular, multi-loop fire alarm control panel expandable up to 8 loops.
Dual-loop expansion card for additional loop capacity.
RS485 Repeater Card to extend network communication distance.
RS232 interface card for establishing PC connections.
Network card utilizing CAN Class B protocol for system integration.
ModBus communication card for third-party system interfacing.
Network card utilizing CAN Class A protocol for system integration.
Network card enabling TCP/IP connectivity for system integration.
Interface card providing USB connectivity for printer output.
Network Repeater Panel for remote control and indication of the fire alarm system.
LCD Repeater Panel providing remote indication for addressable systems.
Intelligent Graphic Repeater Panel for remote visual indication of system status.
Multi-sensor detector combining smoke and heat for fast, reliable fire detection.
Optical detector designed for detecting slow burning or smoldering fires.
Dual heat detector providing FT & RR fire alarm based on semiconductor sensor.
UV Flame Detector that analyzes ultraviolet radiation for rapid fire detection.
Optional remote indicator that connects to detectors for visual status.
Standard detector base for DI-91xxE series intelligent detectors.
Detector base specifically designed for the I-9104 detector.
Addressable reflective infrared beam smoke detector for large areas.
Reflector plate accessory for the I-9105R Beam Detector.
Digital manual call point using the latest digital loop protocol.
Weather proof box accessory for outdoor installation of manual call points.
Protective flip cover accessory for manual call points.
Loop powered module for monitoring dry contact signals.
Module to connect conventional detectors into an addressable system.
Module for driving notification devices or power-required equipment.
Back box accessory for surface mounting of modules.
Loop powered interface for monitoring dry contact signals.
Provides 24VDC active output for fire-fighting or notification devices.
Module with two input channels and relay outputs, occupying two addresses.
Integrated solution for multi-input signals, saving space and cost.
Module for controlling voice alarm broadcasting, monitors power and output circuit.
Module to receive normally open or closed switch signals.
Module with dry contact output and input, programmable for monitoring.
Module controls power route and switches end devices on/off.
Module to connect conventional detectors into an addressable system.
Addressable notification device providing audible and visual alarms.
Intelligent notification device with programmable tones and high-intensity LED.
Intelligent notification device providing audible alarms with programmable tones.
Accessory deep base for sounder and strobe units.
Addressable notification device base with programmable tones.
Addressable notification device base with flashing beacon.
Loop Isolator protects the system by isolating short-circuited sections.
Isolator base compatible with DI series detectors.
Module type isolator installed individually for short circuit protection.
Minimized single loop addressable fire panel for smaller systems.
Communication card for connecting repeater panels or networks.
CAN Hub with 4 routes for linking GST intelligent panels.
CAN Hub with 8 routes for linking GST intelligent panels.
CAN Hub with 12 routes for linking GST intelligent panels.
CAN Hub with 16 routes for linking GST intelligent panels.
Fiber Optic Converter to expand CAN signal communication distance.
CAN Relay to extend network distance and expand system capacity.
Hand Held Programmer for configuring addressable and conventional devices.
Loop Relay Module to enhance loop distance and protect signals.
Conventional Fire Alarm Panel with 2/4/8/16 zone connections.
Conventional Fire Alarm Panel with 2/4/8/16 zone connections.
Conventional Fire Alarm Panel with 2/4/8/16 zone connections.
Conventional Fire Alarm Panel with 2/4/8/16 zone connections.
Active End of Line technology for conventional fire detection zones.
Relay board accessory for the GST102A conventional panel.
Relay board accessory for the GST104A conventional panel.
Relay board accessory for the GST108A conventional panel.
Relay board accessory for the GST116A conventional panel.
Conventional Repeater Panel for zonal fire and fault indication.
Single zone conventional fire panel for small and temporary applications.
Conventional detector combining smoke and heat detection.
Conventional optical detector for detecting slow burning fires.
Conventional dual heat detector for FT & RR fire alarm.
Standard detector base for conventional detectors.
Diode detector base for AEOL compatibility and loop continuity.
Diode detector base for use with DP-9907 Active End of Line.
Common detector base for conventional detectors.
Conventional UV Flame Detector for detecting open fires.
Innovation Manual Call Point for conventional fire alarm systems.
Alarm bell providing clear and continuous alarm sound.
Conventional notification device providing audible and visual alarms.
Conventional notification device with selectable tones and LED cluster.
Conventional notification device providing audible alarms with selectable tones.
UL864 compliant Intelligent Fire Alarm Control Panel with touch screen.
Optional Thermal Printer for real-time system event logging.
Single loop card accessory for the UL listed fire alarm control panel.
Dual loops card accessory for the UL listed fire alarm control panel.
CAN Class A network card for UL listed panel networking.
ModBus card for third-party interfacing with UL listed panels.
Fibre network card for extending communication range of UL listed panels.
Redundancy CPU card for enhanced reliability of UL listed panels.
Intelligent network annunciator for UL listed panels via CAN network.
Intelligent network annunciator for UL listed panels via Fiber-Optic.
Zone display panel accessory for UL listed fire alarm control panels.
Zone display panel accessory for UL listed fire alarm control panels.
Zone display and control panel for UL listed fire alarm control panels.
Zone display and control panel for UL listed fire alarm control panels.
Single loop intelligent fire alarm control panel with UL listing.
UL listed detector combining smoke and heat detection.
UL listed optical detector for slow burning fires.
UL listed dual heat detector for FT & RR fire alarm.
Common detector base accessory for UL listed detectors.
UL listed module to receive normally open or closed switch signals.
UL listed module with dry contact output and input.
UL listed module controlling power route and switching end devices.
UL listed module connecting conventional detectors to addressable systems.
Accessory module box for centralized installation of modules.
Accessory module box for centralized installation of modules.
Optional transparent cover for 1U size din-rail modules.
Optional transparent cover for 2U size din-rail modules.
UL listed digital manual call point using latest loop protocol.
UL listed module type isolator for short circuit protection.
UL listed base isolator for detector bases or stand-alone use.
UL listed 2-wire conventional detector combining smoke and heat detection.
UL listed 2-wire conventional optical detector for slow burning fires.
UL listed 2-wire conventional dual heat detector for FT & RR alarm.
UL listed wall mount sounder strobe with field-configurable options.
UL listed wall mount sounder with field-configurable jumper options.
UL listed wall mount strobe with field-configurable options.
UL listed ceiling mount sounder strobe with field-configurable options.
UL listed module for precision synchronization of sounders and strobes.
Standalone conventional gas extinguishing control panel with 2 detection zones.
Addressable gas extinguishing control panel compatible with GST intelligent FACP.
Addressable gas extinguishing control panel compatible with GST intelligent FACP.
Control for starting and stopping gas extinguishing systems in protected areas.
Accessory indicating gas extinguishing system status above protected area entrance.
Module for solenoid control and monitoring of gas release systems.
Flame-proof manual call point for explosive atmospheres (Zone 1, 2, 20, 21, 22).
Flame-proof reflective beam detector for hazardous industrial areas.
Flame-proof UV detector for areas with open fire and high radiation.
Flame-proof Dual IR detector for explosive zones with flammable dust.
Intrinsically Safe detector combining smoke and heat for hazardous areas.
Intrinsically Safe optical detector for hazardous areas.
Intrinsically Safe dual heat detector for FT & RR alarm in hazardous areas.
Intrinsically Safe detector base for hazardous area applications.
Intrinsically Safe MCP for Zone 1 and 2 areas with explosion-proof requirements.
Interface connecting intrinsically safe detectors/MCPs to addressable systems.
Intrinsically Safe conventional sounder strobe for Zone 1 and 2 areas.
Intrinsically Safe conventional sounder for Zone 1 and 2 areas.
Interface connecting intrinsically safe sounders to addressable systems.
Zener Safety Barrier limiting energy into explosive environments.
Zener Safety Barrier with two lines for energy limitation in explosive environments.
Addressable detector for detecting LPG leakage.
Addressable detector for detecting Natural Gas leakage.
Conventional detector for detecting LPG leakage.
Conventional detector for detecting Natural Gas leakage.
Intelligent power supply unit providing 5A/24VDC for heavy consumption.
Intelligent power supply unit providing 10A/24VDC for heavy consumption.
4-wire conventional smoke detector with normally-open relay output.
4-wire conventional heat detector with normally-open relay output.
Battery powered stand-alone smoke detector with N/O contact output.
Battery powered stand-alone smoke detector with network function.
Fire alarm system monitoring software with a user-friendly interface.
Security device protecting DEF software and panel project configuration data.
Diagram illustrating addressable loop and CAN network system configurations.
Diagram detailing components connected within an addressable loop.
Diagram illustrating components connected within a CAN Class A network.
Diagram illustrating UL listed product system configurations.
Diagrams detailing UL listed components in LAN and CAN/Fiber networks.
Diagram illustrating the connections and layout of the GST-VES system.
Diagram showing GST-VES integrated with GST-IFP8-VT FACP.
System for making emergency voice announcements to building occupants.
Master panel for EVE system providing interface, control, and audio signals.
Distributed panel for EVE system, connected to master panel via RS485.
FACP that triggers EVE system automatically during fire events.
Accessory card for enabling fire phone functionality on the master panel.
Handset assembly accessory for the master panel's fire phone system.
Accessory card providing switches and LEDs for manual control on master panel.
Accessory card controlling switch/LED cards for master panel.
Interface card providing additional inputs to the master panel.
Provides class 'B' or 'A' speaker circuits for distributed panels.
Provides supervised class 'B' fire phone circuits in distributed panels.
Relay for automatic switching/redundant amplification of distributed amplifiers.
Provides additional terminals for fire phone circuits in distributed panels.
Amplifier modules for distributed panels, available in 50W or 100W.
Transformer accessory for amplifier modules.
Card providing RS232 interface between FACP and Master panel.
Conventional fire telephone panel specialized for emergency communication.
Conventional fire telephone panel for emergency communication, rack-mount.
Handsfree speaker telephone for wall mounting, compatible with GST-FT series.
Fixed fire telephone handset for wall mounting, compatible with GST-FT series.
Mobile emergency telephone handset for use by personnel on duty.
Telephone jack socket located at landing levels for connecting mobile handsets.
General| Zones | 200 |
|---|---|
| Event Log | 1000 events |
| Power Supply | AC 220V, 50Hz |
| Operating Temperature | -10°C to 50°C |
| Relative Humidity | ≤95% (Non-condensing) |
| Compatibility | GST intelligent detectors, modules and manual call points |
To Next Page
