GST GST200-2 User Manual

GST GST200-2 Specifications

General

Brand	GST
Model	GST200-2
Category	Control Panel
Language	English

Summary

Installation Precautions

Safety and Installation Guidelines

Adherence to instructions and regulations for safe and reliable installation.

EN 54 Compliance and Information

EN 54-2 and EN 54-4 Compliance

Details FACP compliance with EN 54-2 and EN 54-4 standards and optional requirements.

Technical Specifications

Operating Voltage and Power

Specifies input voltage, frequency, current, fuse, and recommended wiring for power.

Standby Battery Specifications

Details battery type, charge current/voltage, capacity, and recommended wiring.

Communication Loop Parameters

Detection Loop Parameters

Output Loop Parameters

Installation Procedures

Component Inspection and Requirements

Checks engineering requirements and internal components before installation.

Cabinet Installation

Start-up and Initial Checks

Details procedures for powering up the FACP and performing self-tests.

Peripheral Device Connections

Guides on connecting mains power, batteries, and peripheral devices to the FACP.

Connection Checking and Device Registration

Device Definition and Commissioning

System Information Display

Fire Alarm Handling

Explains fire alarm screens, sound indications, and disposal procedures for alarm signals.

Fault Indication and Handling

Details various fault indications, causes, and procedures for handling fault messages.

System Operation and Control

Keypad Operation

User Operation (No Password)

Operator Functions

System Administrator Functions

Battery Calculations and Maintenance

Standby Battery Capacity Calculation

Provides the equation and parameters for calculating required battery capacity.

Maintenance and Troubleshooting