GST GST200-2 - EN 54 Compliance and Information; EN 54-2 and EN 54-4 Compliance

GST200-2 Intelligent Fire Alarm Control Panel
Installation and Operation Manual
Page 2
Preface EN 54 Information
 GST200-2 Intelligent Fire Alarm Control Panel (FACP) complies with the
requirements of EN 54-2 1997+A1: 2006 and EN 54-4 1997+A1: 2002+A2:
2006. In addition to the basic requirements of these standards, the panel
conforms to the following optional requirements.
Option
EN 54-2 Clause
Indication
Fault signals from points
8.3
Control
Delays to Outputs
7.11
Disablement of addressable points
9.5
Outputs
Output to fire alarm devices
7.8
Outputs to fire protection equipment
7.10
 The power supply of GST200-2 FACP complies with EN 54-4
requirements.
AC-DC 100W Power Supply Functions
EN 54-4 Clause
Power supply from the main power source
5.1
Power supply from the standby power source (battery)
5.2
Charger
5.3
Faults
5.4
 In addition to functions required by EN 54-2, the panel supports a number
of ancillary functions that are not required. These are outlined below:
Ancillary Function
Manual Section
P-9901 Printer
3.2.2
RS232 output
2.3 & 3.2.2
GST852RP Repeater Panel
3.3.6
GstDef2.1 Defining Tool
3.4
Fire alarm output
4.4.3.3
RS485 output
2.3 & 4.4.3.5
Class change
4.4.3.1
PAS
6.3.5.4&6.4.5.2
EN 54
√
EN 54
√
EN 54
N/A