11
Holding onto the head with one hand, pull
the bin handle and li the bin out of
the product.
Pull the filter out of the filter housing. Tap the
dirt from the filter and tip any dirt from the filter
housing. Wash the filter if necessary.
Cleaning the filters - do this once a month or more frequently depending on use.
Remove the filter from the inner shroud,
by twisting and pulling.
Tap the inner shroud over a bin to remove any
excess dirt.
Wash the filter under a tap. Squeeze out any
excess water then let it dry completely before
reinserting into the product. Recommended
water temperature 40°C. Do not use
detergent or soaps. Never put the bin back
without filter inside. You could damage
the motor.
5012_System_K9_UF_manual_aw.indd 115012_System_K9_UF_manual_aw.indd 11 18/05/2021 16:3418/05/2021 16:34
To Next Page
Loading...
