Gtech AirRam K9 - Multi K9 Filter Cleaning

20
Remove the filter by pulling it from the top of
the bin. Tap the dirt from the filter and tip any
dirt from the filter housing. Wash the filter if
necessary.
Before washing the filter, you will need to
remove the scented cartridge by pulling it out
from the scented cartridge housing at the top
of the filter.
Ensure tab is refitted on to filter before using.
Wash the filter under a tap, squeeze it out
then let it dry completely before using it.
Recommended water temperature 40°C. Do
not use detergent or soaps. Use your spare
filter while it dries.
(You can get more at www.gtech.co.uk)
Never operate the product without the
filter inside the bin. You could damage
the motor.
Cleaning the filter
5012_System_K9_UF_manual_aw.indd 205012_System_K9_UF_manual_aw.indd 20 18/05/2021 16:3418/05/2021 16:34