12
Removing the battery for charging
Checking battery charge status
Press the button to check how much charge
there is in the battery.
The number of lit LEDs shows the charge.
Figures are approximate.
100%
- 60%
60%
- 30%
30%
-10%
10%
- 1%
Press both buttons at the same time and pull to remove the battery.
1
1
2
If product is jammed/overloaded, wait for the
four LED lights to go out and restart.
When there is no power le, the final LED will
flash for 10 seconds then go out.
=
5514_HT50_Manual_aw3.indd 125514_HT50_Manual_aw3.indd 12 10/07/2024 16:2910/07/2024 16:29
To Next Page
Loading...
