helpline 01905 345891 email support@greytechnology.co.uk web www.gtechonline.co.uk
9
Cutting head adjustment
The cutting head of the trimmer can be adjusted to different angles, allowing you to
comfortably cut in different positions and conditions.
WARNING: switch off the motor before adjusting the head. Do not attempt to adjust
the head while the blades are moving.
Grip the head of the trimmer and press and hold the button on the side marked ‘PUSH’
Rotate the head to the desired angle.
Release the button to lock the head in your selected position.
Ensure the button and head are securely locked in position before starting the trimmer.
push
trimming
hedge faces
trimming
hedge tops
HT01_UKManual2010v3.indd 9 25/03/2010 10:02
To Next Page
Loading...
