16
Product Care
To ensure that your HT20 gives you long and reliable service, carry out the following
maintenance regularly:
• Check for obvious defects such as loose, dislodged, worn or damaged blades, loose
xings, and worn, damaged, or loose parts.
• Check that covers and guards are correctly tted and undamaged.
• Always clean the cutting blade after use and apply a lubricating oil or spray
before storage.
• During longer cutting periods it is recommended to lubricate the blade. This will improve
cutting performance and maximise the run time.
• Before use check the condition of the cutting edges of the blade and that the blade
xings are secure.
• Do not use water, solvents, or polishes to clean the trimmer. Wipe clean with a dry cloth.
• Do not use abrasive materials to clean the product, and do not immerse it in water.
• Store in a secure, dry place, out of reach of children. Do not expose to moisture.
PLEASE NOTE: If the product needs to be repaired or replaced only use replacement
parts supplied by the manufacturer.
Spare parts can be purchased from Grey Technology Ltd:
tel : 01905 345 891 www.gtech.co.uk
Wear protective gloves when handling or cleaning the blade.
To reduce risk of injury ensure that protective blade guard is tted when the trimmer
is not in use, being transported, handled or stored.
To Next Page
Loading...
