20
Remove the lter by pulling it from the top
of the bin. Tap the dirt from the lter and tip
any dirt from the lter housing. Wash the
lter if necessary.
Before washing the lter, you will need to
remove the scented cartridge by pulling it
out from the scented cartridge housing at
the top of the lter.
Ensure tab is retted on to lter before
using.
Wash the lter under a tap, squeeze it out
then let it dry completely before using it.
Recommended water temperature 40°C.
Do not use detergent or soaps. Use your
spare lter while it dries.
(You can get more at www.gtech.co.uk)
Never operate the Multi K9 without the
lter inside the bin. You could damage
the motor.
Cleaning the lter
2860_System_TE_K9_manual_update_aw.indd 20 31/05/2018 11:07
To Next Page
Loading...
