Gtech ORCA WD01 - Using the Screen; Function Modes

Mode
select
back
Mode
select
forward
80%
Sterilizing water
80%
Eco Vaccum
80%
Max Vacuum
80%
Sterilizing water
80%
Eco Vaccum
80%
Max Vacuum
The current mode will display on the screen.
Pressing the on/off button activates the
LCD screen. The buttons cycle forward and
backwards through the different modes.
Sterilizing water – water is dispensed and collected. Use for cleaning the floor.
Eco Vacuum – no water dispensed, water collected, lower power for an extended run time. Use
for drying the floor or picking up spills.
Max vacuum - no water dispensed, water collected, higher power with a shorter run time. Use
for drying the floor or picking up spills.
Using the screen
Function modes
8