EasyManua.ls Logo

Gtech Pro2 - Wall Mount Installation and Use

Gtech Pro2
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Wall mount
Install your wall mount at least 1072mm from
the floor. Universal fixings have been included
- please use the correct fixings for the wall type
you’re mounting this item to. Please use a stud
finder to ensure no water pipes or electrical
cables are hit.
If you are unsure, please seek professional advice.
Pull the detachable tool kit out from the fixed
section of the wall mount.
Optional extras
1072mm
The tools can be stored like this on the wall
mount. Your wall mount will look like the
picture on the right when fully assembled with
the product.
You can also carry the detachable part of your
wall mount with you while you clean - attach it
to your belt. Extra precautions must be taken
to ensure you do not damage the product or
injure yourself.
17
3977_Gtech_Pro_ATF307_Manual_aw.indd 173977_Gtech_Pro_ATF307_Manual_aw.indd 17 14/07/2020 09:5314/07/2020 09:53

Related product manuals