14
Laying the perimeter cable
Keep the cable straight for at least the first
2m. This is to allow the mower to return to the
charging stand with ease.
The perimeter wire must be kept tight. If it
is loose it may well end up being cut by the
mower as it passes over it.
If the wire passes over a moderate dip in the
lawn, more pegs will be required to keep the
wire firmly pegged at ground level, or it risks
being cut.
Place the pegs at intervals of about 1m on
straight and even ground, 30cm to 50cm
on bends and corners. Uneven ground and
obstacles will require more pegs.
3
37
7
4719_Robot_Mower_manual_aw3.indd 144719_Robot_Mower_manual_aw3.indd 14 20/04/2021 16:2220/04/2021 16:22
To Next Page
Loading...
