Gtech RCLM001 - Maintenance; After Winter Storage

28
Maintenance
1. Check and clean mower regularly once a week.
2. When you first start using the mower, the blade plate, protections plate and blades should be
checked once a month.
3. It is important that the blades and blade plate rotate easily.
4. Blade edges should not be damaged. Blade life depends on the type of grass, soil, lawn etc.
5. Working with dull blades gives a poor mowing result, which needs more power to mow,
meaning the mower covers a smaller area at a time.
6. Charge the battery fully at the end of the season before winter storage. If storage time is
longer than one year you will need to recharge the mower before use.
Winter storage
1. Mower must be carefully cleaned before winter storage. Charge the battery fully before
storage.
2. Store the mower in the station and place in a dry area to protect from frost, preferably stored
in the original packaging.
3. Boundary wire can be le in the ground. As the charging station is removed you should
protect boundary wire end from moisture with electrical tape.
Aer winter storage
1. Check whether the mower, boundary wire and charging electrodes need to be cleaned
before use. If the charging strips appear to be rusty, clean them by using an emery cloth or
suitable abrasive cloth. Check whether the mower’s time and date are correct.
2. Check whether the blades need to be changed.
3. Check whether the blades and blade plate turn easily.
4719_Robot_Mower_manual_aw3.indd 284719_Robot_Mower_manual_aw3.indd 28 20/04/2021 16:2220/04/2021 16:22