EasyManua.ls Logo

Gtech RCLM001 - Power off

Gtech RCLM001
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
Start mowing
Power on Power off
1. Press the power button for 3 seconds.
2. Enter the 4-letter PIN code. The default
PIN code is “AAAA”.
3. The mower will now await further
instruction in standby mode.
1. Press the power button for 3 seconds.
1. Press START button
2. Close the cover to start
Note: If the battery is below 70% charge, the
mower enters ‘charge to work’ mode until it
reaches 90% charge. If lower than 30% the
mower returns to base station to charge.
2
1 1
In standard mowing mode the mower will
proceed in a random fashion around your
garden, changing direction each time it
reaches the perimeter wire.
4719_Robot_Mower_manual_aw3.indd 184719_Robot_Mower_manual_aw3.indd 18 20/04/2021 16:2220/04/2021 16:22

Related product manuals