Gtech RCLM001 - Rain Mode; Date and Time

22
Rain mode
Language Date and time
1. Press OK button to enter sub-menu 1.
2. Select ‘setting’ to enter sub-menu 2.
3. Select ‘Language’.
4. Press UP and DOWN buttons to select the
desired language.
5. Press OK button to confirm setting.
1. Press OK button to enter sub-menu 1.
2. Select ‘setting’ to enter sub-menu 2.
3. Select ‘date & time’.
4. Press UP, DOWN, LEFT and RIGHT
buttons to set the date and time.
5. Press OK button to confirm setting.
Setting date and time accurately ensures
scheduling is accurate.
1. Press OK button to enter sub-menu 1.
2. Select ‘setting’ to enter sub-menu 2.
3. Select ‘rain mode’.
4. Press UP and DOWN buttons to enable the
rain mode.
5. Press OK button to confirm setting.
Rain mode sets if the mower will go out in rain
or not. Disabling this will allow the mower to
continue to work in the rain.
WARNING avoid activation during heavy rain
and storms. Wet grass will cause additional
load for the mower and mowing time may be
reduced. In some cases the mower may not
return to the charge base in rain.
4719_Robot_Mower_manual_aw3.indd 224719_Robot_Mower_manual_aw3.indd 22 20/04/2021 16:2220/04/2021 16:22