21
Spot mow
Zone
1. Press OK button to enter sub-menu 1.
2. Select ‘zone’.
3. Press OK button to select the desired zone.
4. Press UP, DOWN, LEFT and RIGHT
buttons to select the distance and
percentage.
5. Press OK button to confirm each zone.
6. Repeat step 3 to 5.
7. Press OK button to confirm the setting of all
the zones.
You can set up to 5 zones in your garden.
This enables you to decide areas of your
garden that need more or less attention.
A zone is set by how far along the boundary
wire from the base station that point is.
The distance should be 0 to 500m and the
percentages should add up to 100% or the
setting cannot be completed.
The mower can be placed within the
perimeter boundary and that the spot mow
function will mow in relatively uniform spiral
pattern. This is useful when you want to cover
a specific area or clear grass on the first mow
more quickly.
1. Place the mower in the garden.
2. Press OK button to enter sub-menu 1.
3. Select ‘spot mode’.
4. Close the cover to start.
ZONE 3
ZONE 2
ZONE 1
1
2
3
mower placed here
4719_Robot_Mower_manual_aw3.indd 214719_Robot_Mower_manual_aw3.indd 21 20/04/2021 16:2220/04/2021 16:22
To Next Page
Loading...
