To Next PageTo Next Page
Need help?Do you have a question about the GTO Linear Pro Access SW3000XLS and is the answer not in the manual?
General| Model | SW3000XLS |
|---|---|
| Max Gate Weight | 1000 lbs |
| Power Supply | 120 VAC |
| Solar Compatible | Yes |
| Operating Temperature | -5°F to 160°F |
| Battery Backup | Yes |
| Max Gate Length | 20 ft |
| Power Source | AC or Solar |
| Battery | 12V DC |
| Control Type | Remote Control |
| Safety Features | Auto-Reverse |
| Warranty | 18 Months |
Defines Class I, II, III, and IV vehicular gate operator categories for specific applications.
Read instructions carefully and completely to familiarize with parts and installation steps.
Instructions for manually opening and closing the gate when the operator is disconnected.
Details on how to disconnect the operator from the gate for manual movement.
Warnings and instructions for consumers regarding gate operator safety and use.
Verify operator suitability, gate condition, and understand safety features before installation.
Guidelines for safe installation of the gate operator on property.
Procedures and precautions to follow after the gate operator is installed.
Install warning signs and ensure pedestrian access is separate for enhanced safety.
Recommends safety devices like sensors for enhanced entrapment protection.
Details on Type A (inherent) and Type B1/B2 (external) entrapment protection systems.
Steps for manually opening and closing the gate operator.
Details on the low friction screw drive, motor, and opening time.
Information on the 12 Vdc battery, transformer, and fuse ratings.
Details on the control board, DIP switches, auto-close, and accessory compatibility.
Chart showing approximate daily cycles based on gate weight and length.
Guides users to choose between transformer or solar charging for the battery.
Table and map showing expected gate cycles based on solar panel wattage and zone.
Diagram illustrating a standard pull-to-open installation on a chain link fence.
Instructions for mounting the post bracket on various types of posts.
Verifies 2" clearance between gate and operator in open/closed positions.
Programs the gate's final closed position using the transmitter and LEARN button.
Enables or disables slow start/stop for smoother gate operation.
Enables or disables audible warnings for gate operation and obstructions.
Configures the operator for push or pull gate opening operation.
Controls sequential opening for dual gate systems.
Explains connections for accessories like buttons, sensors, and keypads.
Specific instructions for installing the operator on gates that open outwards.
Lists symptoms, diagnoses, and checks for audible feedback from the gate operator.
Lists wire, solar panels, and batteries for powering the gate operator.
Covers sensors, intercoms, and pedestals for vehicle access.
Lists automatic gate locks and wireless driveway alarms for security.
Photo beams, pin locks, push buttons, grounding kits, and replacement transformers.
Includes push-to-open brackets and column mount lock receivers.
