EasyManua.ls Logo

GTO Mighty Mule 500 User Manual

GTO Mighty Mule 500
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1. KEEP CLEAR! Gate may move at any time.
2. Do not allow children to operate gate or play in gate area.
3. This gate is for vehicles only. Pedestrians must use separate entrance.
WARNING
!
MOVING GATE
Can Cause Injury or Death
UL325 SERIES
500
®
E-Z GATE OPENER
1-800-543-GATE (4283) • www.mightymule.com
UL325 SERIES
500
®
E-Z GATE OPENER
SINGLE GATE SYSTEM
©
2002 GTO, Inc.
R500INST
rev - 04/03/06
Installation Manual for the
WARNING!
This equipment is similar to other gate or door equipment and meets or exceeds
hazards associated with its use and therefore by installing this product the installer
and user accept full responsibility for following and noting the installation and
safety instructions. Failure to follow installation and safety instructions can result
in hazards developing due to improper assembly. You agree to properly install this
product and that if you fail to do so GTO, Inc. shall in no event be liable for direct,
indirect, incidental, special or consequential damages or loss of profi ts whether
based in contract tort or any other legal theory during the course of the warranty
or at any time thereafter. The installer and/or user agree to assume responsibility
for all liability and use of this product releasing GTO, Inc. from any and all
liability. If you are not in agreement with this disclaimer or do not feel capable
of properly following all installation and safety instructions you may return this
product for full replacement value.
READ ALL INSTRUCTIONS CAREFULLY AND COMPLETELY before
attempting to install and use this automatic gate opener. This gate opener
produces a high level of force. Stay clear of the unit while it is operating and
exercise caution at all times.
All automatic gate openers are intended for use on vehicular gates only.
This product meets and exceeds the requirements of UL 325, the standard which regulates gate opener safety,
as established and made effective March 1, 2000, by Underwriters Laboratories Inc.
3121 Hartsfi eld Road • Tallahassee, Florida, USA 32303
Telephone GTO Sales: 1-800-543-GATE (4283) or (850) 575-0176 • Fax (850) 575-8912
or GTO Technical Service: 1-800-543-1236 or (850) 575-4144 • Fax (850)575-8950
www.mightymule.com
www.mightymule.com
L
I
S
T
E
D
US
Question and Answer IconNeed help?

Do you have a question about the GTO Mighty Mule 500 and is the answer not in the manual?

GTO Mighty Mule 500 Specifications

General IconGeneral
BrandGTO
ModelMighty Mule 500
CategoryGate Opener
LanguageEnglish

Summary

Please Read This First!

Before Installation Checklist

Important Safety Instructions

Disconnecting the Opener

Procedure to manually operate the gate by disconnecting the opener.

Consumer Safety Guidelines

Safety warnings and guidelines specifically for the end-user.

Entrapment Zone Awareness

Identifies hazardous zones to avoid during gate operation.

Installation Safety Precautions

Safety precautions to follow while installing the gate opener.

Post-Installation Safety

Post-installation safety measures and responsibilities.

Secondary Entrapment Protection

Details on additional safety devices to prevent entrapment.

Gate Safety Precautions

Mandated safety measures including warning signs and pedestrian gates.

Technical Specifications

Installation Overview

Gate Preparation

Mounting Position Determination

Opener Mounting

Closed Position Stop Installation

Control Box Mounting

Opener Power Cable Connection

Powering the System

Transformer Installation

How to connect the AC transformer for power.

Low Voltage Wire Requirements

Control Board Settings

DIP Switch Configuration

Explanation of the function and configuration of DIP switches.

Setting Closed Position Limit

Gate Limit Settings Overview

Overview of open and closed limit settings for the gate.

Obstruction Sensitivity Adjustment

Setting Personal Transmitter Code

Receiver Installation

Connecting Safety Devices

Contact Sensors (Safety Edges)

How to connect safety edge sensors for entrapment protection.

Non-Contact Sensors (Photo Beams)

Shadow Loop Safety Detector

Push-to-Open Installation

Setting Open Position Limit

Repair Service

Column Installation Information

Related product manuals