EasyManua.ls Logo

GTO 2002XLS User Manual

GTO 2002XLS
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
WARNING!
This equipment is similar to other gate or door equipment and meets or exceeds
Underwriters Laboratory Standard 325 (UL 325). However, gate equipment has
hazards associated with its use and therefore by installing this product the installer
and user accept full responsibility for following and noting the installation and safety
instructions. Failure to follow installation and safety instructions can result in hazards
developing due to improper assembly. You agree to properly install this product and
that if you fail to do so Gates That Open, LLC, (“GTO”) shall in no event be liable for
direct, indirect, incidental, special or consequential damages or loss of prots whether
based in contract tort or any other legal theory during the course of the warranty
or at any time thereafter. The installer and/or user agree to assume responsibility
for all liability and use of this product releasing Gates That Open, LLC, from any and
all liability. If you are not in agreement with this disclaimer or do not feel capable of
properly following all installation and safety instructions you may return this product
for full replacement value.
READ ALL INSTRUCTIONS CAREFULLY AND COMPLETELY before attempting to
install and use this automatic gate operator. This gate operator produces a high level
of force. Stay clear of the unit while it is operating and exercise caution at all times.
All automatic gate operators are intended for use on vehicular gates only.
This product meets and exceeds the requirements of UL 325, the standard which
regulates gate operator safety, as established and made eective March 1, 2000, by
Underwriters Laboratories Inc.
For more information on the GTO/ACCESS SYSTEMS full line of automatic gate
operators and access controls visit our website at www.gtoaccess.com.
©2011 Gates That Open, LLC Printed in China for Gates That Open, LLC. R4728 01.12.12
, LLC
®
DUAL Gate Operator System
Installation Manual
2002XLS
2002XLS
PROFESSIONAL RESIDENTIAL
ACCESS
SYSTEMS
PROFESSIONAL INSTALLATION RECOMMENDED!
Question and Answer IconNeed help?

Do you have a question about the GTO 2002XLS and is the answer not in the manual?

GTO 2002XLS Specifications

General IconGeneral
ModelGTO 2002XLS
Power Supply120V AC
Motor TypeDC
Operating Temperature-5°F to 160°F
Control TypeRemote Control
Warranty1 year
Remote ControlYes
Safety FeaturesAuto-reverse, obstacle detection
Maximum Gate Weight650 lbs
Gate Length Capacity20 feet
Maximum Gate Length20 feet

Summary

IMPORTANT SAFETY INSTRUCTIONS

Consumer Safety Guidelines

Safety advice for consumers regarding gate operation and installation.

Installation Safety Precautions

Safety measures to follow during and after the gate opener installation process.

Gate Safety Requirements

Essential safety measures for gate installations, including warning signs and entrapment protection.

Technical Specifications

2002XLS Parts List

Installation Tools and Materials

Installation Overview

Installing the Gate Operator

Positioning and Securing Brackets

Fine-tuning bracket positions for clearance, leverage, and securing them properly.

Mounting Brackets and Arm

Drilling holes, mounting brackets, and attaching the operator arm securely.

Installing Dual Gate Components

Installing and Setting Position Stops

Installing closed position stops for secure gate closure.

Mounting the Control and Battery Box

Connecting the Battery and Control Box

Connecting Power and Cables

Connect Operator Power Cables

Wiring the power cables from the operators to the control board terminals.

Connect the Transformer

Connecting the AC transformer to the control board for power.

Setting Position Limits

Set Closed Position Limit

Adjusting the gate's final closed position using the control board settings.

Adjusting Gate Operator Settings

Adjust Stall Force Setting

Setting the force the opener applies before stopping or reversing on obstruction.

Personal Transmitter Setup

Push-To-Open Installation

Set Open Position Limit (PTO)

Configuring the open position limits specifically for push-to-open installations.

Solar Panel Installation

Connecting Accessories

Troubleshooting Common Issues

Repair Service Information

Related product manuals