Guldmann GH2 F - Installation; Deinstallation

12
601 Installation
Preparation, installation
Place the transport trolley containing GH2 F vertically beneath the travelling
trolley in the rail system. Check that there are no obstacles of any kind
between GH2 F and the travelling trolley.
1. Attach the travelling trolley’s anchor with cord to the locking mechanism on
the top of GH2 F (point 8.02)
2. Choose the function “Installation” with the help of the switch at the bottom of
the hand control
3. Installation is begun by briey activating the toggle switch on the hand con-
trol, direction UP
4. Installation has been completed when GH2 F is automatically locked in the
travelling trolley
5. Move the switch at the bottom of the hand control to position
to complete installation
We recommend steering/guiding GH2 F with the hanger so that it is free from
the transport trolley during installation
The GH2 F lifting module must not be allowed to swing from side to side
during installation
602 Deinstallation
Where applicable, remove the lifting sling from the lifting hanger.
Place the transport trolley beneath the travelling trolley in the rail system.
Check that there are no obstacles of any kind between GH2 F and the
transport trolley.
( )
( )
© Guldmann US-882/12/2011 • # 900690_1.01
© Guldmann US-882/12/2011 • # 900690_1.01
© Guldmann US-882/12/2011 • # 900690_1.01 © Guldmann US-882/12/2011 • # 900690_1.01