Guldmann GH2 F - Service Inspection, Travelling Trolley for GH2 F

23
3 Remove cover/screen
4 Checking the electrical state of the hoist
• Check batteries for:
• Input/voltage
• Output/voltage
• Check electrical functions and signals
• Check the wiring circuits for faults or defects
• Check the cable lead-ins
• Check the power supply, plugs, etc.
5 Checking the mechanical state of the hoist
• Clean to remove dirt and other impurities
• Inspect and evaluate the condition of vital parts
• Replace defective and worn parts
• Check and tighten all moving parts
• Lubricate the product
• Apply silicone oil to the surface of the product if necessary
6 Replace cover/screen
7 Go through the checkpoints under item 2 again to make sure that
everything functions
8 Have new problems arisen or been found under item 7?
• If new problems have arisen, return to item 3
• If there are no new problems, the inspection has been completed
9 When a service inspection including service work or exchange of com-
ponents has taken place, the nal check should comprise a weight test
with the product’s nominal load
1303 Service inspection, travelling trolley for GH2 F
Deinstall GH2 F and put it on the transport trolley before service inspections
of the Travelling trolley for GH2 F are carried out.
1 Visual control of the hoist
• Check for wear, irregularities, or other types of damage to the hoist
2 Remove cover/screen
• Clean the hoist to remove dirt and other impurities
• Inspect and evaluate vital parts
Every second year or after 2000 installations:
• Dismantle the complete locking and winding mechanism
• Install new, complete Quick lock (spare part)
3 Replace cover/screen
4 Adjust the length of the cord in relation to the height of the rail
© Guldmann US-882/12/2011 • # 900690_1.01 © Guldmann US-882/12/2011 • # 900690_1.01
© Guldmann US-882/12/2011 • # 900690_1.01
© Guldmann US-882/12/2011 • # 900690_1.01