10
be on and the brightness indicator will be off.
Slave m ode: c olor t em pera tu re indica t or and b right ness i ndic at or
are alway s on.
⑥ On-line control (Joint control between lamps and lanterns):
Prepare more than two photographing lights, set one to the master mode, set
the rest to the slave mode, and set the channel of the master / slave through
the add / subtract key. When the channels of the master and the slave are the
same, the brightness and color temperature of the slave in the same channel
can be controlled synchronously by adjusting the brightness and color
temperature knobs of the master.
To Next Page
Loading...
